
3M
3M™ Thinsulate™ Kit — Sprinter LWB High Roof
Genuine 3M™ Thinsulate™ SM600L for the Mercedes-Benz Sprinter LWB high roof, supplied as 6 vacuum-packed bricks.
- Coverage
- 27.9 m²
- Thickness
- 42 mm
- In the kit
- 6 bricks
- Install time
- 6–8 hrs
Add installation
Fitted by a vetted installer near you, or DIY. Install is quoted and invoiced by the installer — nothing extra is charged here.
Everything's ticked. Untick anything you'll fit yourself — the estimate follows what's left.
Est. install: $0 — confirmed by your installer before the job.
Your installer will confirm a quote.
In stock — ships in 7–10 days · Australia-wide
Description
Genuine 3M™ Thinsulate™ SM600L for the Mercedes-Benz Sprinter LWB high roof, supplied as 6 vacuum-packed bricks. Each brick unfolds to one 1.52 × 3.05 m piece (4.6 m²) that lofts to 42 mm. That's 27.9 m² in total, enough for the walls and roof of the empty cargo area. Delivered Australia-wide in about 7–10 days. Freight calculated at checkout.
What you get
- 6 × 3M™ Thinsulate™ SM600L bricks, 1.52 × 3.05 m each
- Covers 27.9 m²
- Spray adhesive not included: allow 3 cans of 3M™ Hi-Strength 90 (add it here, A$52.90 a can)
Doing the doors as well? Add one brick and one can of adhesive.
Why Thinsulate
- Quiet: absorbs road noise, drone and echo, strongest in the mid to high frequencies.
- Comfortable: helps keep heat out in summer and warmth in during winter.
- Won't hold water: hydrophobic fibres resist moisture, mould and mildew. No separate vapour barrier needed.
- Light and clean to fit: cuts with scissors. No fibreglass, no itch, odourless.
- Fire safe: self-extinguishing, meets FMVSS 302 for automotive interiors.
Specifications
| Product | 3M™ Thinsulate™ Acoustic Insulation SM600L |
| Thickness | 42 mm once lofted |
| Weight | 672 g/m² (about 3.1 kg per brick) |
| Make-up | 65% polypropylene, 35% polyester, black scrim on one face |
| Temperature | Up to 120 °C |
| Fire | Self-extinguishing (FMVSS 302) |
| Made in | USA, by 3M |
Fitting
- Open the bag and unfold the piece. It takes 72 hours to a week to fully re-loft. It's easier to fit while still compressed.
- Cut to shape with scissors or a sharp knife.
- Spray adhesive on both the panel and the insulation, wait until tacky, then press in place.
- Fill cavities and pillars loosely. Don't crush it.
Spray adhesive
Use a high-temperature, heavy-duty spray adhesive. Van panels get hot in an Australian summer, and general-purpose craft sprays let go.
- Recommended: 3M™ Hi-Strength 90, 500 g. Allow 3 cans for this van. Add it to your order at A$52.90 a can. Aerosols ship by road within Australia, separately from your insulation.
- Pick up locally: Selleys Kwik Grip High Temp Spray, 350 g, rated to 90 °C, from Bunnings or Mitre 10. Smaller can, so allow about 5 cans.
Price match promise
Found genuine 3M™ Thinsulate™ SM600L cheaper from an Australian seller, including Amazon AU or eBay AU? Send us the link before you order. If it's the same coverage for the same vehicle and in stock, we'll match the delivered price. Retail orders only; excludes trade, clearance and auction listings.
3M™ and Thinsulate™ are trademarks of 3M Company.
Specifications
| Fitment | 2007+ Mercedes-Benz Sprinter LWB high roof |
|---|---|
| Contents | 6 × 3M Thinsulate SM600L bricks, 1.52 × 3.05 m |
| Coverage | 27.9 m² (walls and roof) |
| Thickness | 42 mm once lofted |
| Weight | about 18.6 kg |
| Fire | self-extinguishing, FMVSS 302 |
| Adhesive | allow 3 cans 3M Hi-Strength 90 (sold separately) |
Shipping & compliance
Ships from the USA · freight calculated at checkout. Orders delivered within Australia are tracked door to door. Shipping is calculated at checkout. See our shipping policy for details.
Installation
Typical install time: 6–8 hrs
Not confident doing it yourself? Get in touch and we'll point you to a fitter near you.
Choose options
Add installation
Fitted by a vetted installer near you, or DIY. Install is quoted and invoiced by the installer — nothing extra is charged here.
Everything's ticked. Untick anything you'll fit yourself — the estimate follows what's left.
Est. install: $0 — confirmed by your installer before the job.
Your installer will confirm a quote.
In stock — ships in 7–10 days · Australia-wide
Add installation
Fitted by a vetted installer near you, or DIY. Install is quoted and invoiced by the installer — nothing extra is charged here.
Everything's ticked. Untick anything you'll fit yourself — the estimate follows what's left.
Est. install: $0 — confirmed by your installer before the job.
Your installer will confirm a quote.
In stock — ships in 7–10 days · Australia-wide




